Canopy Network Updater Steps

Canopy Network Updater Steps

For firmware updates on Cambium equipment via the Canopy Network Updater tool.

1. Launch Canopy Network Updater
2. Select Update → Manage Packages → ensure the 21.0 STA is selected
3. Right-click NETWORK ROOT → click Add Network Element
4. Uncheck Use Default Settings
5. Fill in:
   • Device Login ID: admin
   • Device Password: plut0
   • Confirm password
6. Leave HTTP settings as-is
7. Ensure Element Host Name(s)/IP Address(s) is checked
8. In the box at the bottom, type in the device's management IP
9. SNMP Read/Write community: backinblack80
10. SNMP Version: v2c, Port: 161
11. Click OK
12. Go to Update → Update Entire Network Route